CARE PRODUCT FOR ANODIZED SURFACES
Anodized surfaces are very robust. In order to maintain the surface appearance of any anodized layers a certain care is essential. For this purpose we recommend our care product “Alupolish”, that has been suggested by the aluminium centre and has...
WINDOW SILL SCREWS
These special screws securely attach the window sill to the window sill connection profile. The fine thread with drill tip enables the screws to be used effectively. Torx screws are pre-fitted with a plastic washer. This covers the slot in...
NOISE REDUCTION STRIP
High-quality bitumen sealing film to minimise the noise of rain drops (effect of pelting rain). The noise reduction strip is self-adhesive. It is highly flexible at room temperature and accommodates warping without difficulty. The width of the noise reduction strip...
SCREW STRIP SEAL
The rear screw mounting edge of the window sill is perfectly sealed against the window sill connection profile by attaching our TPE seal. The seal is available in black and white.
WINDOW SILL BRACKET
The solid aluminium bracket is designed to stabilise the window sill and secure its position when subject to pressure or suction loads. It is advisable to use window sill brackets for overhangs starting from 150 mm.
BRACKET FOR CLINKER BRICKWORK OR EXPOSED FACADES
Window sill bracket for clinker brickwork or exposed facades. It is advisable to use window sill brackets for overhangs starting from 150 mm.
BRACKET FOR PLASTER WALLS
Window sill bracket for uninsulated plaster walls. It is advisable to use window sill brackets for overhangs starting from 150 mm.
INNER CORNER CONNECTOR (VIE)
The simple and economic solution for creating 90° or 135° corner connections of our FBS 40 and FBS 25 window sill systems. This system is not driving rain-proof, therefore we recommend a second sealing layer.
OUTER CORNER CONNECTOR (VAE)
The simple and economic solution for creating 90° or 135° corner connections of our FBS 40 and FBS 25 window sill systems. This system is not driving rain-proof, therefore we recommend a second sealing layer.
H-CONNECTOR
Aluminium connector for covering/connection of two window sill elements. Due to linear extension, the H-connectors are recommended for bright surfaces (e.g. E6/EV1, RAL 9016) from 3.000 mm and for dark surfaces (E6/C34, RAL 7016) from 2.000 mm. This system is...